header img contact us

What is Safety Audit in Trucking

The Safety Inspection and Safety Audit in Trucking

Working in the trucking industry comes with a high level of responsibility on the road, as collisions or accidents can have devastating consequences and costs. Commercial motor vehicles (CMVs) present some unique safety challenges — from having to navigate wide turns because of sheer size to the inherent dangers of transporting hazardous materials. That’s why, unsurprisingly, the Federal Motor Carrier Safety Administration (FMCSA) requires trucking companies to conduct a number of safety reviews to ensure that CMVs adhere to safety regulations. This is what you need to know about the safety inspection and safety audit in trucking compliance.

Table of Contents
arrow_down [#338] Created with Sketch.
  • FMCSA Safety Audits
    • Difference Between New Entrant and Other Safety Audits
    • How the Safety Rating Is Calculated
    • How to Do Safety Audit in Trucking
  • Safety Lane Inspection for Trucks
    • Preparing for a Safety Lane Inspection

FMCSA Safety Audits

There are three main types of Department of Transportation (DOT) safety audit:

  • New Entrant. In order to complete the New Entrant Program, all motor carriers with a company must submit to a safety audit within the first 12 months of that company’s operation. This is to ensure that prior to engaging in long-term business, the company’s motor carriers are complying with all relevant regulations with respect to Federal Motor Carrier Safety and Hazardous Materials — as well as record-keeping requirements.
  • Targeted. If a company has failed audits or has not adhered to driving regulations, it will have an elevated Compliance, Safety, and Accountability (CSA) score. The DOT may target this company and require it to undergo a safety audit to gauge whether the company is doing what it needs to do. Before the actual audit, the company will usually receive multiple warnings.
  • Compliance. Compliance safety audits are done either randomly or because there have been reports about safety issues with your company or its fleet. There will always be some notice provided by phone before auditors show up and conduct a compliance review.

Difference Between New Entrant and Other Safety Audits

Safety audits are done to make sure that companies maintain safety requirements for their own drivers, other drivers on the road, and with respect to loads being transported. Whether you are considered safe to stay on the road depends on what is revealed in company driving records, evidence of driver behavior, and other inspections (such as the annual safety lane/vehicle inspection) that have been conducted. The main difference between the New Entrant audit and the other types of safety audit is the “outcomes” associated with the particular audit.

New Entrant audits result in either a “pass” — indicating that your company adheres to the FMCSA requirements and you can register with the FMCSA and could be subject to targeted or compliance reviews in the future — or a “fail.” If you get a failing score, you will have to file a “corrective action plan” that shows how you will remedy whatever it is that made you fail. If you don’t submit a corrective action plan (or don’t follow through with it), you could lose your registration with the FMCSA, without which you cannot do business. You will receive the outcome of your New Entrant safety audit within 45 days of the review.

For targeted and compliance safety audits, the outcomes are one of the three following ratings: satisfactory, conditional, or unsatisfactory.

  • A “satisfactory” rating means your company has shown it is doing everything to maintain the proper safety standards and has a good safety record.
  • A “conditional” rating means that your company may not have shown any problems but has failed to follow all the FMCSA safety requirements, which could lead to a potential safety problem in the future.
  • An “unsatisfactory” rating means that there were already safety problems on the company’s record and your company has not complied with all the standards. Depending on your classification/load type, you will be given 45 to 60 days to raise your score.

How the Safety Rating Is Calculated

The main factors that will determine your safety rating appear in §385.7 of the federal transportation regulations:

  • Whether your safety management controls are adequate or “substantially below the norm” compared to similar companies. Things like prior accidents, violations, or safety “incidents” could be considered to be evidence of lax or inadequate controls.
  • Number, frequency, and severity of (federal) regulatory violations
  • Number, frequency, and severity of violations of state regulations that are compatible with federal rules
  • Number, frequency, and severity of roadside/safety lane inspection violations that have been identified during prior inspections
  • Number, frequency, and severity of driver/vehicle violations (such as out-of-service drivers and vehicle violations)
  • Number and frequency of vehicle accidents and safety incidents, how preventable they were, and whether they have increased or decreased over time
  • Trends in relation to compliance violations over the years and whether they are increasing or decreasing

How to Do Safety Audit in Trucking

Preparing for a safety audit is all about getting the required documentation and materials for the auditors, including:

  • Driver qualification files and documents — things like driver logs, driver employment applications, previous employers of drivers, clear substance use test results from former employment, state agency location/criminal/driving history inquiries, medical examination certificate, road test results and certification, driver’s certificate of violations and road reviews.
  • Vehicle documents — things like records of inspections the vehicle has had, records about any repairs the vehicle needed and received to resolve past violations, and driver post-trip inspections.
  • Proof of insurance — to show adequacy of and proper coverage. The insurance required for each vehicle depends on your business, the vehicle classification, and what/who it is allowed to transport. You must maintain at least the minimum coverage for each vehicle.
  • Drug and alcohol testing program information — as outlined in Part 382 of the federal regulations. Every company must implement a drug and alcohol testing program to randomly check workers for substance abuse.
  • Accident register — including copies of all accident reports that outline the driver’s name, incident date, fatalities or injuries, where these incidents occurred, and whether there were any hazardous materials released as a result of the accidents.

In general, when you are thinking of how to do a safety audit in trucking businesses, you want to provide auditors with as much paperwork showing that you have the FMCSA safety mandates in place, make an effort to get and keep your drivers ready to drive safely, and address and correct any violations you have had quickly and competently.

Safety Lane Inspection for Trucks

What is a safety lane inspection for trucks? When someone talks about a “safety lane inspection for trucks,” they could be referring to any safety inspection required by the DOT or state authorities.

At the federal level, every CMV — which includes each vehicle in a combination — is required to undertake a yearly inspection by a qualified inspector (a trained/certified inspector from the DOT or a state police officer, usually). The inspector will be looking for any violations outlined in the CMV Step, Handhold, and Deck minimum requirements in the federal regulations. A CMV cannot be used unless each of those listed components, parts, and accessories has passed inspection during the past 12 months. Furthermore, the documentation of this inspection must remain in that vehicle.

Different states may have different requirements regarding the frequency and scope of safety inspection. Still, the intention is the same: to ensure that the vehicle is safe for the road and that the driver adheres to safety requirements.

There are six main types or levels of inspection you may encounter:

  • North American Standard Inspection — The inspector checks driver documents and looks for drugs, alcohol, or hazardous materials being transported. Driver documents include driver’s license, daily log/hours of service, Driver and Vehicle Inspection Report, and medical certificate/waiver. They will be specifically looking at: seatbelts, brakes, brake lamps, cargo securement, coupling devices, exhaust system, emergency exits, frame, fuel system, headlamps, lamps on projecting loads, safe loading, steering mechanism, stop lamps, suspension, tail lamps, tires/wheels as well as rims and hubcaps, trailer bodies, turn signals, and windshield wipers. In buses, they will also look at electrical cables/systems in the engine and battery compartments.
  • Walk-Around Driver and Vehicle Inspection — This is almost identical to the North American Standard Inspection, except that the inspector won’t be checking parts that require them to get under the vehicle.
  • Driver-Only Inspection — This is an in-depth examination of the driver’s license, medical card/certificate, daily log, and incident history, as well as the Driver and Vehicle Inspection Report and any applicable Hazmat requirements.
  • Special Inspection — This is a one-time inspection on a particular feature of the CMV, usually to support or refute a previous claim about this CMV, a study, or what is suspected to be a “trend” (as described earlier).
  • Vehicle-Only Inspection — This includes everything in the North American Standard Inspection but without the driver present.
  • Enhanced NAS Inspection for Radioactive Shipments — This is for all CMVs that carry “highway route controlled quantities” of radioactive material. The inspection includes everything in the North American Standard Inspection, as well as looking into particular radiological requirements (shipments, inspection procedures, enhancements, and out-of-service criteria).

Preparing for a Safety Lane Inspection

In many cases, you can catch problems and get appropriate repairs before bigger safety issues arise — simply by conducting your own walk-around inspection before and every vehicle trip. Look at your tires and all your lights and check for any potential safety issues. Also, make sure you deal with any cracks (no matter how small) you see on your windshield as soon as practicable.

If you have any questions about safety inspections, safety audits, or safety requirements for your truck, we at Logity Dispatch are happy to answer them. After all, helping owner-operators of trucking companies make more money — and keep it — is why we are here. We can help with compliance requirements, document management, provide high-caliber dispatch and load negotiation services, and more. Contact us today to find out how we can help your trucking business grow.

(NOTE TO CLIENT: I did not use the “truck safety inspection lanes” keyphrase because I couldn’t find anything or any way to incorporate it that made sense. The phrase itself implies that there are specific inspection “lanes” out there…and it doesn’t appear to be the case.)

Helen Adams

Helen is the best dispatch manager at logitydispatch.com. Takes first place in the local rating of employees for more than a year.
Has been with us for over two years.
Knows several languages, enjoys yoga and is great at jurisprudence.
She started writing articles because she believes that knowing the legal aspects of the profession is as important as knowing how to drive a truck well.

Explore author’s articles