Featured image for article: Reefer Load Boards Compared DAT Truckstop and Free Boards

Short answer

Reefer freight is posted on the same big boards as van and flatbed. DAT lists it under eight reefer equipment codes and shows average lane rates for reefer from the Enhanced plan ($149 a month) up. Truckstop is the only major board we checked with a reefer-only plan: Reefer Basic costs $42 a month for a block of up to 3 users and shows refrigerated freight only, and Reefer Pro ($159) adds rate data and broker ratings. Direct Freight has a free account. Whatever board you use, the booking is not done until the temperature, pre-cool and wash requirements are in writing.

A reefer owner-operator finds most loads on DAT and Truckstop, the same as a dry van carrier. What is different is the search (reefer has its own equipment codes), the plan (Truckstop sells a reefer-only version), and the call to the broker, where a missed detail on temperature or washout can turn a good rate into a rejected load. Prices below were checked on the board websites on November 20, 2026.

Reefer equipment codes to search on DAT

Brokers do not post every cold load as plain “Reefer”. DAT publishes its equipment abbreviations, and these are the reefer ones:

CodeEquipment typeWhat it tells you
RReeferStandard refrigerated trailer; the main search
RAReefer Air-RideReefer with air suspension
R2Reefer DoubleDAT describes it as a reefer that carries two loads
RZReefer HazmatNeeds a hazmat endorsement and placards
RNReefer IntermodalRefrigerated container moving between modes
RLReefer LogisticsReefer used in logistics operations
RMReefer w/ TeamLoad needs a team of drivers
RPReefer w/ Pallet ExchangeBring pallets to swap at pickup
Source: DAT One Help Center, equipment type abbreviations, checked November 20, 2026.

A solo driver with a standard trailer should search R, and add RA if the trailer has air ride. Skip RM unless you run a team, and skip RP unless you carry spare pallets, because both are conditions of the load, not just labels.

What the boards cost for a reefer carrier

Board and planPriceReefer rate dataNotes
DAT One Standard$59/moNoDAT marks it for partial load operators
DAT One Enhanced$149/mo15 day average lane ratesDAT recommends it for new owner-operators with a reefer
DAT One Pro$169/mo7 day average lane ratesAdds TriHaul routing and a $250 DAT Assurance credit
Truckstop Reefer Basic$42/mo per block of up to 3 usersNoShows refrigerated freight only
Truckstop Reefer Pro$159/mo per block of up to 3 usersFreightWaves SONAR insights, RPM heat mapAdds broker ratings, Book It Now, live loads, load alerts
Direct FreightFree accountNoLoad search, alerts and saved searches
Prices from each board’s website, checked November 20, 2026. Truckstop prices exclude fees and taxes. Confirm on the board before you subscribe.

DAT One

DAT shows average spot rates for three trailer types: van, reefer and flatbed. Standard ($59) has no lane rates. Enhanced ($149) adds 15 day averages and is the plan DAT names for new owner-operators running a van, reefer or flatbed. Pro ($169, for 1 to 3 trucks) moves to 7 day averages and adds TriHaul, which suggests triangle routes, and a $250 credit with DAT Assurance if a broker does not pay. The DAT One app is included in all subscriptions, and the plan chart lists broker credit data: days to pay, credit scores and reviews.

Truckstop reefer plans

Truckstop sells two plan lines. The standard line starts at $42 a month per user. The reefer line, described as best for owner-operators running reefer equipment exclusively, is priced per block of up to 3 users: Reefer Basic $42 and Reefer Pro $159, with load search limited to refrigerated freight. So if a spouse or a dispatcher also logs in, the reefer line costs less than buying separate seats, as long as you never want to see van loads. Reefer Basic includes private loads, truck posting, backhaul search, an authority age filter, Canadian loads and broker factorability data. Reefer Pro adds FreightWaves SONAR insights, broker ratings, Book It Now, real time live loads, an RPM heat map and load alerts. Truckstop charges a $42 non refundable application fee, credited to your first month if you are approved, and shows only loads that match your operating authority.

Free board: Direct Freight

Direct Freight offers a free account with load search, email or text alerts and saved searches. It works as a second source. It does not replace the lane rate and broker data of a paid plan, and on reefer those decide whether a load is worth the fuel the unit burns.

Which plan a reefer owner-operator needs

Reefer rates move with produce seasons and regional demand, so a posted rate means little without a lane average next to it (see reefer rates for owner-operators). That makes DAT Standard and Truckstop Reefer Basic search tools, not pricing tools. If you book on your own, the plans to compare are DAT Enhanced or Pro against Truckstop Reefer Pro.

Season matters as much as the board. Produce seasons and Midwest protein lanes shift reefer demand through the year; our notes on Midwest reefer corridors and produce season cover both. The subscription is also the smallest cost of the board. Hours of calls and loads booked under the market cost more, a tradeoff we compare in brokers vs load boards vs dispatchers.

How a reefer load gets booked: what to confirm before you accept

Under the FDA Sanitary Transportation rule (21 CFR 1.908), a shipper of food that needs temperature control generally must give the carrier the operating temperature in writing, including pre-cooling if needed. When the carrier has agreed in writing to be responsible for sanitary conditions, it must pre-cool the unit as the shipper specified and, if asked, show that it held the temperature, for example with readings at loading and unloading or time and temperature data from the trip. In practice that turns into a short list of questions for the broker:

  • Setpoint in writing. The exact temperature on the rate confirmation or bill of lading, not only on the phone. See our reefer temperature range guide for typical settings by product.
  • Continuous or cycle. Ask which mode the shipper wants. Continuous mode burns more fuel, so settle it before you agree on a rate.
  • Pre-cool. To what temperature and for how long before you back into the dock.
  • Washout and trailer condition. Does the shipper require a washout certificate or a specific cleaning before loading, and who pays for it?
  • Pallets, lumpers and appointments. Pallet exchange (the RP code), lumper fees at the receiver, and fixed appointment times with detention terms.
  • Temperature record. Whether the receiver will ask for a download from the unit, so you keep the data until the load is paid.

Then check the offer against the lane rate and the broker’s days to pay on your board before you sign the rate confirmation.

Frequently asked questions

Which load board is best for reefer loads?

DAT and Truckstop both carry reefer freight. For rate data, compare DAT Enhanced ($149) or Pro ($169) with Truckstop Reefer Pro ($159 for up to 3 users). Prices checked November 20, 2026.

Is there a reefer-only load board plan?

Yes. Truckstop sells Reefer Basic ($42) and Reefer Pro ($159), each priced per block of up to 3 users, with load search limited to refrigerated freight.

What equipment code should I search for reefer loads on DAT?

Search R (Reefer), and add RA if your trailer has air ride. RM means the load needs a team and RP means pallet exchange, so include them only if you meet those terms.

Is there a free reefer load board?

Direct Freight offers a free account with load search, alerts and saved searches. It lacks the lane rate and broker data of paid DAT and Truckstop plans.

Does the shipper have to give me the temperature in writing?

For food that needs temperature control, the FDA Sanitary Transportation rule (21 CFR 1.908) requires the shipper to specify the operating temperature to the carrier in writing, including pre-cooling when needed.